OSOCYLO Cyclomount Bike Mount Holder for iPhone 6 / 6 Plus, 5S & Smartphones Review


Cyclomount Bike Mount Holder for iPhone 6/6 Plus, 5S & Smartphones by OSO 

What about this for a mobile phone cycle mount by OSO it will hold many different mobile phones including i Phones, it will hold any device sized from 55 – 93mm wide. Including i Phone 4 / 4S,        i Phone 5 /5S, i Phone 6, Samsung Galaxy S range, Samsung Galaxy Note Range, HTC's, Nokia's & many more.
– Easy and Secure mounting mechanism. Silicone strap provided to ensure tight grip while riding.
– Fits phones with and without cases.
– Universal handlebar mounting fits all types and sizes of handlebars on bikes & motorbikes.
– Strong ball joint allows horizontal or vertical positioning of your smart phone.
– Covered by OSO mounts Free 2 Year Warranty

Great specifications and it has a two year guarantee as standard. 

Time to put it to the test 


Whats in the Box

There is no mystery to whats in the box, the mount along with a few other bits, like extra rubber strips to make the mount fit any size handle bar, a Hex key to tighten up the Hex bolt and that is all you need to make the OSO mount fit your  handle bars.

How easy is it to fit.

 The answer to that question is, "Very easy" if you are capable of tightening up a bolt then you can fit the OSO mount.

The great thing about the OSO mount is it will hold some of the widest mobile phones on the market today!
 It is truly fully adjustable to any angle.

 OSO Mount
2 x rubber strips
1 x Hex bolt
1 x nut.

 It comes supplied with an Allen key and three rubber strips to ensure a tight grip on any size handle bar.


Rear view of the OSO,
The ball joint allows the OSO to rotate and tilt to any angle, simply tighten the locking nit to hold it secure.

Handle bar clamp with the Allen bolt and rubber strip shown.

 Offer up the OSO mount into the position you want it to be fitted, open up the clamp to fit over your bar.

When the mount feels solid you can fit the Allen bolt, if not, simply place a rubber strip around the inside of the clamp.

Add a rubber strip if needed.

 Open up the clamp and place in the rubber strip.

Tighten up the Allen bolt and make sure it is in the right angle before fully tightening.
When fitted the red silicon grips either side to grip your mobile, adjustable by loosening the nut on the rear,  for extra stability OSO have added a strap that fits onto all four corners of your mobile.

 Simply place your mobile into the grippers, if its too small adjust the width of the clamps via the nut on the rear,  the same if the clamps are too wide, just adjust to hold firm always remembering to tighten up the small locking nut.

Place the holding strap onto each corner for added security.

Side view.

Rear view.

You can adjust the OSO to any angle.

  What about a road bike fitting.

 Same as the MTB bike open up the clamp

 Fit the OSO in place

 Tighten the Allen bolt

 Fit to the position you require and put in your mobile.

Really nice solid feel to the OSO when fitted with the mobile.

Our Verdict 

For a phone mount it ticks all the boxes
Extra security from the clamps and the straps to all four corners of your phone.
Easy fit set up, fitted every handle bar I tried it on with no problems.
Adjusted to any angle to make it easier to see and use the phone.

Simply put it is a good solid mount, well worth looking at if you need a phone mount with the added bonus that no matter how many bikes you have this is fully adaptable to every handle bar, so you only need this one mount for all your bikes.

If your on the market for a phone holder check out the OSO Cyclemount here on OSO website priced at £19.99


Any questions then give OSO a shout out on twitter here on this link


Facebook link


Foot Note This is not a Paid Advertisement for OSO

1 comment:

Please do leave a comment

Peatys Tyre Sealant for cycles.

Peatys Tyre Sealant Review  https://peatys.co.uk/ Welcome to my follow on review blog on the Tubeless Tyre Sealant, I’ve decided to change f...