Take a look at this Mountain Bike Brake Upgrade from
Edge Sports UK Stockists of the Juin-Tech brand check them out here
How easy were the Juin-Tech to fit.
I had no problem setting the front calliper up correctly.
Once you are happy with the pipe feed tighten the front fork pipe clamp bracket.
Now for the rear.
Remove the front grips and brake lever.
One you are happy with the position of the brake lever and calliper, tighten to the correct torque setting.
Colour coordinated now with the Juin-Tech DB1 Brake levers.
How do I rate the fitting of the DB1 Hydraulic Disc Brake System from Juin-Tech
and Edge Sports UK,
10 out of 10 for easy of fitting.
10 out of 10 for style.
10 out of 10 for sharp braking.
The Ride Out!
At last he time has come to take the Trek and its new Juin-Tech DB1 Hydraulic brakes for a test ride, this is the time you normally find out that something that has not been set up just quite right, or a little fine adjustment is needed on the callipers ,but in this instance not a single thing needed adjustment. It was so easy to fit the DB1 From Juin-Tech, they worked a treat, stopped nice and sharp.
This is the first time I had ever done anything like this before, and it has given me the confidence to have a go at other things, I still have to give it a little time for the brake pads to bed in a bit, but no problems anywhere on the braking system, credit must go to the Juin-Tech designers.
Find Juin-Tech here on Facebook
Juin-TechUK distributor is Edge Sports UK
Check out there web page, any questions your not too sure about they can help you.
Juin-Tech also do Hydraulic Disc conversion for Cycle Cross bikes so check their website.
The difference these Juin-Tech DB1 Brakes made to the 29er was amazing, you can pull up a lot quicker than with a standard set of brakes, also I have noticed there is no rubbing or grinding noises anywhere and the wheels roll much smoother with these fitted.
If your after better stopping power at a great Quality and price, then you need to check out their range of brakes.
Feel free to ask me any questions on the Juin-Tech DB1 in the comment box below.
Thanks for reading if you have got this far in the review and please share the blog
Thank You !
Foot Note This is not a Paid Advertisement for Juin-Tech
Review blog update on the DB1 Brakes sytem.
- 2x Locking syringes
- 1x EBT/aspiration syringe
- 1x Bleed nipple vent tube
- 1x Injection tubing with locking adaptor
- 4x Brass bleed adaptor
- 1x Shimano 2012-onwards master cylinder bleed adaptor
- 2x Tube clamps
- 2x Cable ties
- 1x Elastic band
- 3x Torx screwdriver bit
- 1x Pair of nitrile (latex free) gloves
Looking forward to giving the kit a try out, but in the mean time check out Epic Bleed Solutions website if you are in need of any brake bleed advice and kit,
Review update 29/11/2017: Finally got around to bleeding the @Juin-Tech DB1 with the +Epic Bleed Solutions Universal bleed kit, review link here
SUPERB BRAKE BLEED KIT THAT WILL SAVE YOU LOADS OF MONEY!
Eoic Bleed Solutions Contact Details.
Twitter feed: https://twitter.com/epicbleedkits
Facebook link: https://www.facebook.com/epicbleedsolutions
Twitter Feed: https://twitter.com/edgesportsukllp
Facebook Feed: https://www.facebook.com/edgesportsuk/
Facebook feed: https://www.facebook.com/juintaiwan/
Foot Note This is not a Paid Advertisement for Juin Tech, Edge Sport UK, Epic Bleed Solutions.
Harlow cycle page on Facebook: https://www.facebook.com/Harlow-Cycle-Page-805601672891539/ YouTube: https://www.youtube.com/channel/UCBlXmH7f4X0Az_xr7Az0Yqg
Tumbler : http://harlowcycle.tumblr.com/
Twitter Feed: @TDF79 ....................................................................................................................